Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: REVIEW: DIY by Jon Risch Signal SU/DU balanced conditioner Power Conditioner/Surge Protector posted by jea48 on July 10, 2012 at 07:40:17:
In my research of going balanced in the archives I didn't find much talk about voltage which to me is a big factor if considering going DIY.
Jon states on his website that the signal tranformers have a no load to rated load regulation of around 5% or better.
I just got a SU-2 online and started some test across all configuration while using a heater with a variac that I should be able to report on tomorrow. Initial findings are around 5% half loaded and closer to 10% almost fully loaded.
I agree with jea48, call you provider or better yet try to contact the rep for your area.
one pic of my enclosure, a 12x12x8 electrical box.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: REVIEW: DIY by Jon Risch Signal SU/DU balanced conditioner Power Conditioner/Surge Protector - ecir38 08:10:34 07/10/12 (0)