Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: "the low Mu low resistance chokes that Jeff Medwin recommended" posted by 1973shovel on September 13, 2016 at 19:37:44:
"
These are the chokes I use most of the time. Either of them will work but the one on the right has a higher current ratings and lower DCR and lower inductance.I use these in the Mc30s and I also use the one on the left in the Mc30s.You use one or the other and put it in place of the 150 ohm resistor in the Mc30s and the B+ goes up by a whole 2.8vdc. BFD eh?
The C36X on the left is the one I use in the HF87 in place of the 50 ohm resistors because it has plenty of current and the DCR is a little higher at 30 ohms.This fits nicely under the HF87 and you don't have to drill any holes.
Get these Chokes at Allied or Mouser.The Triad C-36X and Triad C-40X
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- No Problem. - Michael Samra 21:08:03 09/13/16 (9)
- Alternatives - Triode_Kingdom 08:18:41 09/14/16 (7)
- Thanks for the reminder - 1973shovel 13:45:31 09/14/16 (5)
- RE: Thanks for the reminder - Tre' 18:34:05 09/16/16 (4)
- RE: "More would be better" - 1973shovel 07:19:38 09/18/16 (0)
- RE: Thanks for the reminder - Michael Samra 02:01:58 09/17/16 (2)
- RE: Thanks for the reminder - JimL 19:47:23 09/23/16 (0)
- RE: "Not necessarily" - 1973shovel 07:23:17 09/18/16 (0)
- RE: Alternatives - Michael Samra 10:20:42 09/14/16 (0)
- Thanks Mike! (nt) - 1973shovel 06:59:41 09/14/16 (0)