In Reply to: RE: LOL! I spent a lot of time working on textbook crossover computations... posted by Presto on March 21, 2012 at 15:19:54:
Well, I did a little more research, with the help of some of those guys you mentioned, and decided to go with a different design. Here's what I've come up with.MCM 8" Carbon Fiber: 2 for each speaker wired in parallel.
Power Capacity: 75W/150W RMS/peak
Sensitivity: 92dB (W/M)
Impedance: 8ohm
Re: 6.0ohm
Le: 1.92mH
Frequency response: 30Hz ~ 8KHz
Fs: 29Hz
Qts: 0.17
Qes: 0.17
Qms: 8.73
Vas: 80.46 (liters)
Xmax: 1.5mmVifa XT25BG60-04:
Power handling: 90 watts RMS/140 watts max • VCdia: 1" • Impedance: 4 ohms • Re: 2.9 ohms • Frequency response: 1,500-40,000 Hz • Fs: 630 Hz • SPL: 92.4 dB 2.83V/1m • Dimensions: Overall diameter: 4.125", Cutout diameter: 3.125", Depth: 2.20".
I'm going to use a Linkiwitz-Riley 2nd order 2-way design, crossed over at 3900Hz or 3300hz (still on the fence). Chosen due to manufacturer measurements and suggestions.
I'm having to go all out with this design because it's going to be powered by a 330watt per channel amp (at 4ohm), with a pre-amp without a sub out. Therefore, these speakers must do everything. Specifically these speakers would be powered by the Yamaha MX-1000U amp, and I'm not sure these speakers can handle it. I keep getting conflicting information about what constitutes a speakers power handling capability.
Suggestions, while knowing that, at least for this project, I won't be independently measuring the components due to lack of funds/equipment. I designed the box using Bass Box Pro 6, basic crossover design using basic calculators and some info from PCD.
Edits: 03/22/12 03/22/12
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- How about this design? - Gataca 11:52:51 03/22/12 (17)
- RE: How about this design? - Mr. Dick Hertz 17:51:11 03/22/12 (16)
- I second that recommendation - Presto 22:25:56 03/22/12 (15)
- Maybe I'm missing something here, but - Gataca 08:18:32 03/23/12 (11)
- RE: Maybe I'm missing something here, but - Presto 00:01:34 03/24/12 (10)
- RE: Maybe I'm missing something here, but - Gataca 09:25:11 03/24/12 (9)
- What I am going to write - Stale 10:41:42 03/24/12 (8)
- I wouldn't say brash, per se, as much as - Gataca 12:51:08 03/24/12 (7)
- RE: I wouldn't say brash, per se, as much as - Stale 20:06:01 03/24/12 (6)
- Why is it so difficult... - Gataca 20:53:57 03/24/12 (5)
- RE: Why is it so difficult... - Stale 21:54:20 03/24/12 (4)
- RE: Why is it so difficult... - Gataca 10:51:27 03/25/12 (3)
- RE: Why is it so difficult... - Stale 13:47:43 03/25/12 (2)
- RE: Why is it so difficult... - Gataca 21:30:17 04/10/12 (0)
- RE: Why is it so difficult... - Inmate51 08:52:49 03/30/12 (0)
- Not to mention, his proposed design looks like the net impedance... - Mr. Dick Hertz 07:19:55 03/23/12 (2)
- RE: Not to mention, his proposed design looks like the net impedance... - Gataca 07:54:47 03/23/12 (1)
- I doubt - Stale 22:22:23 03/24/12 (0)