Hi all:
I picked up a JBL PB12 sub for $20 at Goodwill a while back. When I plugged it in... nothing. I took it apart and found a blown fuse. There is a sticker which reads: "Replace only with fuse with same specs., 250V, 2.0 amp., Type 'T' SLO-BLO." I have replaced the fuse with that type of fuse (except that I've never seen anything specifying "Type T,") and the result is always the same, it blows almost instantly. (And yes, I have made sure that the replacement fuses were "SLO-BLO.") Any suggestions other than the trash? Thanks in advance.
Kerry
This post is made possible by the generous support of people like you and our sponsors:
Topic - No power to JBL sub - Kidomaha 19:37:09 09/30/14 (8)
- Blown Fuse ... - Bromo33333 07:46:42 10/05/14 (1)
- RE: Blown Fuse ... - Kidomaha 15:16:00 10/05/14 (0)
- It could be as simple as a shorted bridge rectifier - Alpha Al 08:57:09 10/01/14 (2)
- RE: It could be as simple as a shorted bridge rectifier - Kidomaha 09:09:23 10/01/14 (1)
- RE: It could be as simple as a shorted bridge rectifier - Alpha Al 12:50:37 10/01/14 (0)
- RE: No power to JBL sub - Kidomaha 01:01:23 10/01/14 (0)
- i did a little research.. - cloudwalker 23:30:45 09/30/14 (0)
- RE: No power to JBL sub - cloudwalker 22:59:59 09/30/14 (0)