In Reply to: RE: solid core/ non shielded/unterminated power cord recommendations posted by lokie on September 6, 2016 at 15:34:58:
You could make what would IMO likely be an informative comparison of solid vs stranded by just wiring something up with both wires of the same gauge from the hardware store. Like an amp with 12awg and compare the sound. Use the exact connectors, of course. After hearing that you could then explore higher quality alternatives. The TRL's are multifactorial, so it may be or is likely that you didn't isolate the solid vs stranded issue or the wire gauge issue. I'm on the stranded side of things along with thick(er) ,UL and Duster approved, of course. T456
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: solid core/ non shielded/unterminated power cord recommendations - Tweaker456 21:32:57 09/11/16 (5)
- There is a very good chance most aftermarket power cords- - jea48 08:17:02 09/12/16 (4)
- RE: There is a very good chance most aftermarket power cords- - Tweaker456 13:58:00 09/12/16 (3)
- RE: There is a very good chance most aftermarket power cords- - jea48 17:28:43 09/12/16 (2)
- RE: There is a very good chance most aftermarket power cords- - Tweaker456 19:35:50 09/12/16 (1)
- RE: There is a very good chance most aftermarket power cords- - jea48 20:36:22 09/12/16 (0)